Figure 2-62. Supervisor Record

TM 5-6350-275-10

Figure 2-62. Supervisor Record

(3) NAME. Enter the supervisor's name. You can enter up to 30 characters. Press the [NEXT] key.

NOTE

If the supervisor is also a System Operator, the system must be able to differentiate

between the Supervisor User Name and the System Operator User Name. To prevent

confusion when logging on to the system ensure that the supervisor name is unique.

(4) PASSWORD. Enter a password. The password can be up to 12 characters long. Press the [NEXT] key.

(5) ADDRESS. Enter up to 48 characters. Press the [NEXT] key.

(6) TELEPHONE. You can enter up to 12 digits. Press the [NEXT] key.

(7) PRINTER. Do not change this field. Printer name was established during installation. Press the [NEXT]

key.

(8) ZONE. Enter the zone names authorized. Press the [NEXT] key to move to the next field. Up to 32 names

can be entered.

(9) Press [GO] to save the record.

(10)

Press [FINISH] to leave the program or press the F10 [DISCRD] key to discard entries.

b. Modify a Zone Supervisor.

(1) Press the F3 Supervisor Records key from the Police Officer Menu Page. A list of current Zone Supervisor

Records, Figure 2-61, is displayed.

(2) Press the F2 [MODIFY] key and use the up and down arrow keys to select the record to modify. Press [GO]

to display the Zone Supervisor Record. At this point you may change any of the following fields:

2-98