 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-6350-275-10
(e) Press [GO] to display all alarms of the specified type in the chosen queue; this display becomes link 1 of
a new chain.
(3) The [ONLY] key displays alarms for a specific point or the telemetry alarms of a particular RADC. The
RADC/point concerned can be one whose data appears in either the alarm frame or a display. Either before or after
selecting this key, you should specify the criteria for the display by:
Identifying the alarm queue required.
Selecting the display order of the alarms using either the [CHRON] or [PRIOR] key.
Selecting the type of alarms required using the [ACKED], [UNACK], and/or [DEFER] keys.
(a) When you select the [ONLY] key, the system highlights the corresponding option on the soft-key legend.
You can then press [GO] to select the RADC or point whose alarm appears at the top of the selected queue, or cursor to
select a particular RADC or point from any display. The system displays a list of alarms for the chosen RADC point and
return you to the main menu.
(b) If the display is created using the cursor option, it becomes the next link in the current chain. Otherwise,
it becomes the first link in a new chain.
(4) The [RANGE] soft-key displays alarms relating to particular stations, points, zones, devices, and data
categories. When you press the key, all options are removed from the menu except [QUIT]. You can select the
information required by displaying the first in a series of up to eight prompts which are listed below:
Group(s)
Stn(s) (RADC)
Prefix
Numeric
Suffix
Zone
Device
Category
(a) The Group(s) and Station(s) prompts are used to select the RADCs whose alarms are required.
Pressing [GO] after you have responded to the Station(s) prompt results in a display of telemetry or housekeeping alarms
for the selected RADCs. Pressing [NEXT] leads to the next prompt in the series.
(b) The Prefix, Numeric and Suffix prompts allow you to use the mnemonic assigned to each point to
define which points are to be displayed. In response to the prompts you can enter either the required part of the
mnemonic or the wild card character (*). Then press [NEXT] to move to the next prompt or [GO] to end the command
and create a display. When you press the [NEXT] key, the system displays your entry in the command input frame. If
you do not make an entry in response to the numeric and/or suffix prompts, the system assumes that you want to display
points which do not have a numeric and/or suffix and uses the space character (,) to indicate this.
(c) Zone allows you to define the zones whose alarms are to be displayed. You can enter the name or
number of a zone or use the * to indicate all zones. Pressing [NEXT] leads to the next prompt and [GO] results in the
alarms being displayed.
2-48
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals