DIFFERENCES BETWEEN MODELS - TM-5-6350-275-100035

TM 5-6350-275-10

(12) Ultrasonic Motion Sensor (UMS). The Ultrasonic Motion Sensor (UMS) detects intruder motion within a

protected area. The sensor detects Doppler shifts in the ultrasonic signal generated by intruder motion.

(13) Capacitance Proximity Sensor (CPS). The Capacitance Proximity Sensor (CPS) can be used either as a

penetration sensor or as a point sensor. The Capacitance Proximity Sensor (CPS) detects the change in capacitance

between the connected object and ground resulting from the close approach or touch of an intruder. The Capacitance

Proximity Sensor (CPS) has a field adjustable sensitivity control. The Capacitance Proximity Sensor (CPS) adjusts to

slowly changing values of total capacitance caused by the environment without alarm.

(a) As a penetration sensor it is connected to isolated metal bars, mesh, or screens which cover windows, vents,

and other openings.

(b) As a point sensor it is connected to safes, file cabinets, and other metal objects.

(14) Passive Infrared Motion Sensor (PIMS). The Passive Infrared Motion Sensor (PIMS) detects intruder

motion. It is available in three configurations. All configurations alarm at 2 degree celsius temperature differential

between the intruder and the background.

(a) Volumetric. The detection pattern extends from 8 feet to 30 feet and at angles up to

60 degrees.

(b) Curtain. The detection pattern extends from the sensor mounting level to the floor; to a minimum of 30 feet,

and at angles up to 3 degrees. The maximum angle covered by the sensor is approximately 6 degrees.

(c) Omni-directional. The detection pattern extends out to 30 feet from a point directly beneath the sensor and

all angles about a line through this point.

1-12. DIFFERENCES BETWEEN MODELS. There are two different configurations of the Integrated Commercial

Intrusion Detection System: the Large Primary Monitor Console (LPMC), and the Small Primary Monitor Console

(SPMC). The difference between the two configurations is the quantities of equipment. The Large Primary Monitor

Console (LPMC) can monitor up to 256 zones. The Small Primary Monitor Console (SPMC) can monitor up to 64 zones.

Table 1-1 provides the differences between the Large and Small Primary Monitor Consoles.

1-27