APPENDIX C BASIC ISSUE ITEMS LIST, ITEMS TROOP INSTALLED OR AUTHORIZED LIST. REPAIR PARTS AND SPECIAL TOOLS LIST

APPENDIX C

BASIC ISSUE ITEMS LIST, ITEMS TROOP

INSTALLED OR AUTHORIZED LIST. REPAIR

PARTS AND SPECIAL TOOLS LIST

Section I. INTRODUCTION

C-1. Scope

support items to indicate the manner of acquiring

support items for maintenance, repair, or overhaul of

This appendix lists basic issue items; items troop

end items. Source codes are entered in the first and

installed or authorized; repair parts; special tools;

second positions of the Uniform SMR Code format as

test, measurement, and diagnostic equipment

follows:

(TMDE); and other support equipment required for

operation and performance of organizational, direct

Definition

Code

support and general support maintenance of the

P A . . . . . . Item procured and stocked for anticipated or known

passive signal ultrasonic processor and passive

usage.

signal ultrasonic receiver.

PB . . . . . .Item procured and stocked for insurance purposes

C-2. General

because essentiality dictates that a minimum quan-

The Basic issue Items List, Items Troop Installed

tity be available in the supply systems.

PC . . . . . .Item procured and stocked and which otherwise would be

or Authorized List and Repair Parts and Special

coded PA except that it is deteriorative in nature.

Tools List are divided into the following sections:

PD . . . . . . Support item, excluding support equipment, procured for

a. Section II. Basic Issue Items List. ( N o t

initial issue or outfitting and stocked only for

Applicable).

subsequent or additional initial issues or outfittings.

b. Section III. Items Troop Installed or Au-

Not subject to automatic replenishment.

thorized List. (Not Applicable).

PE . . . . . . Support equipment procured and stocked for initial issue

or outfitting to specified maintenance repair activities.

c. Section IV. Repair Parts List. A list of repair

PF . . . . . . Support equipment which will not be stocked but which

parts authorized for use in the performance of

will be centrally procured on demand.

maintenance. The list also includes parts which must

PC . . . . . . Item procured and stocked to provide for sustained

be removed for replacement of the authorized parts.

support for the life of the equipment. It is applied to an

Parts list are composed of assembly groups in

item peculiar to the equipment which, because of

probable discontinuance or shutdown of production

ascending numerical sequence, with the parts in

facilities, would prove uneconomical to reproduce at a

each group listed in figure and item number

later time.

sequence. Bulk materials are listed in FSN sequence.

KD . . . . . An item of a depot overhaul/repair kit and not purchased

d. Section V. Special Tools List. (Not Applicable).

separately. Depot kit defined as a kit that provides

e. Section VI. Federal Stock Number and Part

items required at the time of overhaul or repair.

N u m b e r I n d e x . A list in ascending numerical

K F . . . . . .An item of a maintenance kit and not purchased

separately. Maintenance kit defined as a kit that

sequence of all Federal stock numbers appearing in

provides an item that can be replaced at organiza-

the listings followed by a list, in alpha-numeric

tional or intermediate levels of maintenance.

sequence, of all part numbers appearing in the

KB . . . . . Item included in both a depot overhaul/repair kit and a

listings. Federal stock numbers and part numbers

maintenance kit

are cross-referenced to each illustration figure and

MO . . . . . Item to be manufactured or fabricated at organizational

level.

item number appearance.

M F . . . . . Item to be manufactured or fabricated at the direct

C-3. Explanation of Columns

support maintenance level.

MH . . . . . Item to be manufactured or fabricated at the general

The following provides an explanation of columns

support maintenance level.

found in the tabular listings:

MD . . . . . Item to be manufactured or fabricated at the depot

a. Illustration. This column is divided as follows:

maintenance level.

(1) F i g u r e N u m b e r . Indicates the figure

A 0 . . . . . .Item to be assembled at organizational level.

A F . . . . . .Item to be assembled at direct support maintenance

number of the illustration in which the item is

level.

shown.

A H . . . . .Item to be assembled at general support maintenance

(2) Item Number. The number used to identify

level.

each item called out in the illustration.

A D . . . . . Item to be assembled at depot maintenance level.

b. Source, Maintenance and Recoverability Codes

X A . . . . . Item is not procured or stocked because the requirements

(SMR).

for the item will result in the replacement of the next

higher assembly.

(1) Source Code. Source codes are assigned to

C-1