Special Information - TM-5-6350-262-14-110042

TM 5-6350-262-14/11

NAVELEX 0967-LP-466-9112

TO 31S9-4-39-1

group, subfunctional group, or an assembly. A "V"

manufacturer, distributor, or Government agency, etc.

appearing in this column in lieu of a quantity indicates

For BIIL and ITIAL, see explanation column, in f, below.

f. Description. Indicates the Federal item and, if

that no specific quantity is applicable (e.g., shims,

spacers, etc.).

required, a minimum description to identify the item. (In

BIIL and ITIAL only, the following will be used: "The last

C-4. Special Information

line for each item in the BIIL and ITIAL indicates the part

number with the FSCM in parentheses." Items that are

included in kits and sets are listed below the name of the

(None)

kit or set with the quantity of each item in the kit or set

C.5. How to Locate Repair Parts

indicated in the quantity incorporated in unit column.

When the part to be used differs between serial numbers

of the same model, the effective serial numbers are

a. When Federal Stock Number or Part Number is

shown as the last line of the description. In the Special

Unknown:

Tools List, the initial basis of issue (BOI) appears as the

(1) First. Using the table of contents, determine

last line in the entry for each Special Tool, TMDE, and

the assembly group within which the repair part belongs.

support equipment.

When density of equipments

This is necessary since illustrations are prepared for

supported exceeds density spread indicated in the basis

assembly groups and listings are divided into the same

of issue, the total authorization is increased accordingly.

groups.

g. Unit of Measure (U/M). Indicates the standard of

(2) Second. Find the illustration covering the

the basic quantity of the listed item as used in perform

assembly group to which the repair parthbelongs.

ing the actual maintenance function. This measure is

(3) Third.

Identify the repair part on the

expressed by a two-character alphabetical abbreviation

illustration and note the illustration figure and item

(e,g., ea, in, pr, etc.). When the unit of measure differs

number of the repair part.

from the unit of issue, the lowest unit of issue that will

(4) Fourth. Using the Repair Parts Listing, find

satisfy the required units of measure will be

the figure and item number noted on the illustration.

requisitioned.

b. When Federal Stock Number or Part Number Is

h. Quantity Furnished With Equipment (Basic Issue

Known:

Items Only). Indicates the quantity of the basic issue

(1) First. Using the Index of Federal Stock

item furnished with the equipment.

Numbers and Part Numbers, find the pertinent Federal

i. Quantity Authorized (Items Troop Installed or

stock number or part number. This index is in ascending

Authorized Only). Indicates the quantity of the item

alpha-numeric sequence, cross-referenced to the

authorized to be used with the equipment will be

illustration figure number and item number.

requisitioned.

(2) Second. After finding the figure and item

j. Quantity Incorporated in Unit. Indicates the

number, locate the figure and item. number in the repair

quantity of the item used in the breakout shown on the

parts list.

illustration figure, which is prepared for a functional

Change 2 C-3