APPENDIX C BASIC ISSUE ITEMS LIST, ITEMS TROOP INSTALLED OR AUTHORIZED LIST, REPAIR PARTS AND SPECIAL TOOLS LIST

APPENDIX C

BASIC ISSUE ITEMS LIST, ITEMS TROOP

INSTALLED OR AUTHORIZED LIST, REPAIR

PARTS AND SPECIAL TOOLS LIST

Section I. INTRODUCTION

(1)

Source Code.

Source codes are

C-1. Scope

assigned to support items to indicate the manner of

acquiring support items for maintenance, repair, or

This appendix lists basic issue items; items troop

overhaul of end items. Source codes are entered in the

installed or authorized; repair parts; special tools; test,

first and second positions of the Uniform SMR Code

measurement, and diagnostic equipment (TMDE); and

format as follows:

other support equipment required for operation and

performance of organizational, direct support and

general support maintenance of the ultrasonic motion

signal processor and transceiver.

C-2. General

The Basic Issue Items List, Items Troop Installed or

Authorized List and Repair Parts and Special Tools List

are divided into the following sections:

a. Section II. Basic Issue Items List. (Not

Applicable).

b. Section III. Items Troop Installed or Authorized

List. (Not Applicable).

c. Section IV. Repair Parts List. A list of repair

parts authorized for use in the performance of

maintenance. The list also includes parts which must be

removed for replacement of the authorized parts. Parts

lists are composed of assembly groups in ascending

numerical sequence, with the parts in each group listed

in figure and item number sequence. Bulk materials are

listed in FSN sequence.

Section V.

Special Tools List.

(Not

Applicable).

e. Section VI. Federal Stock Number and Part

Number Index. A list in ascending numerical sequence

of all Federal stock numbers appearing in the listings

followed by a list, in alpha-numeric sequence, of all part

numbers appearing in the listings.

Federal stock

numbers and part numbers are cross-referenced to each

illustration figure and item number appearance.

C-3. Explanation of Columns

The following provides an explanation of columns found

in the tabular listings:

a. Illustration. This column is divided as follows:

(1) Figure Number. Indicates the figure

number of the illustration in which the item is shown.

(2) Item Number. The number used to

identify each item called out in the illustration.

Source, Maintenance and Recoverability

Codes (SMR).

C-1