Table 2-1. Tools, Test Equipment and Material Required for Installation

Table 2-1. Tools, Test Equipment and Material Required for Installation - Continued.

Item

Purpose

Applicable Publications

Masonry drill, carbide tipped, 5/8 inch dia.

Drill through masonry

Drill, 3/8 inch dia. inch shank

Provide pilot hole for hole punch

Hole punch, 7/8 inch dia., Greenlee

Provide conduit entrance holes in enclosures

Crimping tool, terminal lug

Miscellaneous hardware

flat washers, No. 10 and inch

wood screws, No. 12, inch long

round head sheet metal screw,

No. 12 - 1 inch long machine screws,

-20 X 1 inch long

STAR TAP-IN, inch o.d.

(-20 thread) toggle bolts,

10-24 thread construction type

hanger clamps, plywood, inch thick

crimp lugs

Figure 2-4. Noise level and walk test equipment setup.

2-5