|
|
TM 5-5430-209-12
(3) Remove nuts and brackets (1) from the lap
bolts from which the scaffold brackets were removed.
seams.
Tighten the nuts.
(4) Install steel recessed washer and nuts on the
Section V. ASSEMBLY AND INSTALLITION ACESSORIES
6-16. Access Ladder
b. Assembly.
(1) Place right ladder section (1, fig. 6-19) and left
a. General. The access ladder consists of a
ladder section (2) on blocking with the inside angles
bolted and prewelded steel assembly. It is attached to
facing each other and the 11-hole sides up.
the tank at the stave chimes.
6-20
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |