NOTES - TM-5-5420-212-10-20040

NOTES:

a. Add LNCG posts, LNCG and nose roller.

b. Check the LR is under LZ given or higher. Remove nose sections

as they pass LRP, observing minimum 5 ft (1.5 m) overhang. Leave

last three nose sections in place until far bank end of bridge has

been lowered to ground

c. Launch until far bank end of bridge is 9 in (23 cm) from LRP, or end

of ETP overhangs FRB by 1.5 ft (0.5 m).

d. Put bridge on ground

* Add entire launching nose with LRP secured with tie down strap

( ) Center of gravity.

2-15