Side Panels

TM 43-0156

Figure D-3-2. Skid-Type Base (2-inch Forklift Flooring).

c. Side Panels. Figure D-3-3 depicts the fabrication characteristics of side panels. Place vertical struts on 24-inch

centers. Use one horizontal brace when crate height exceeds 60 inches through 96 inches. Use two horizontal braces

when crate height is over 96 inches through 120 inches. Fit horizontal braces between vertical struts. Upper and lower

frame members, vertical struts, and vertical end struts are 2- by 4-inch lumber for net loads to 10,000 pounds, 2- by 6-

inch lumber for loads over 10,000 to 20,000 pounds and 2- by 8-inch lumber for loads over 20,000 pounds. Use 6d nails

to secure plywood sheathing to frame members. Clinch nails on the framing.

D-3-3