 |
|||
|
|
|||
|
Page Title:
Accessories (shipped inside control unit) (refer to fig. B-3-1 for location of items). |
|
||
| ||||||||||
|
|
 TM 43-0156
Step
Function
Mech
Insp
3
(c) Cover the battery vent, located on top of shelter,
cont
with tape (7510-00-916-9659). Tape 7510-00-890-
9875 may be used as a substitute.
c. Accessories (shipped inside control unit) (refer to
(1) Conduit (24 x 4) 24 each.
(a) Coat the threaded end of the conduit with preserv-
ative (8030-00-526-1605) and allow to dry.
(b) Place the conduit in a plywood box (27 x 18 x 24)
marked "CONDUITS."
(2) Flexible Metal Fuel Hose, Universal (three, 1-inch
and one, 2-inch).
(a) Dip hoses in preservative oil (9150-00-281-2007)
and allow to drain.
(b) Wrap hoses in barrier (8135-00-226-3124).
(c) Place into a fiberboard box (24-1/2 x 7 x 5).
Seal box with tape (7510-00-297-6655). Mark box
to identify contents.
(3) Cables.
(a) Cover exposed ends of electrical cables with bar-
rier (8135-00-226-3124). Secure barrier with tape
(b) Coil cables and secure in four places with barrier
(8135-00-226-3124) and tape (751 -00-266-6715).
0
(c) Place flexible hose and cables in a plywood box
(24 x 24 x 24) marked "FIRE HOSE AND CABLES."
(4) Ground Rods. Place ground rods in a PPP-B-601 box
(75-1/2 x 4-1/4 x 4-1/4).
(5) Aspirator Gaskets. Tape each gasket to fiberboard.
Place gaskets in a fiberboard box (32 x 32 x 2).
Seal box with tape (7510-00-297-6655). Mark box to
identify contents.
(6) Fluorescent Lamps. Cushion lamps with cushioning
(8135-00-855-6969) and secure in place with tape
Change 1
B-3-58
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals