DEPRESERVATION - TM-43-01560199

TM 43-0156

Step

Function

Mech

Insp

DEPRESERVATION

Follow instructions given on DA Form 2258.

Follow instructions on tags attached to the engine control

panel.

Unpack, inspect, and assemble all components.

Fill dry-charged battery as follows:

The battery you have received with the set is cha ged and

dry. If the battery has been stored in a cool, dry

place, you can expect it to deliver approximately 75 per-

cent of its rated power when filled with electrolyte.

Perform the following steps to fill a new battery.

WARNING

If battery electrolyte is spilled on skin or clothing, immediately wash with

cold water or a sodium bicarbonate solution to prevent severe skin burns

or damage to clothing.

CAUTION

Avoid spilling battery electrolyte on painted surfaces. Damage to painted

surfaces may result.

a. Remove the battery cell vent caps.

b. Remove and destroy the vent plugs which seal tile holes

below the vent caps.

WARNING

Do not add electrolyte solution to a battery that has been filled previously.

Add only distilled water to a battery in service; add electrolyte only to a dry

battery.

B-3-46