Preservation of Fuel Transfer Pump (two).

TM 43-0156

Step

Function

Mech

Insp

(2)

Coil cables and secure with four evenly spaced

cont

pieces of barrier (8135-00-244-8885) and tape

j. Preservation of Technical Manuals and Logbooks. Place

technical manuals and logbooks into a plastic bag

(8105-00-269-4662). Heat seal or staple bags.

k. Packing for Power Cable (675 ft for 1500 KW, 900 ft for

2000 KW), Ground Wire (200 ft), Control Cable (three for

1500 KW, four for 2000 KW), Neutral Conductor (four for

2000 KW), Battery Jumper Cables, Bolt, Nuts, Lock-

washers, Ground Rod Clamp Box, Technical Manuals, and

Logbooks.

(1) Place the power cables into the wooden box (44 x 44

x 20 for 1500 KW) (44 x 44 x 26 for 2000 KW). Place

the control cables inside the power cables.

(2) Place the ground cable into center of the pow r

cables.

(3) Place the box containing bolts, nuts, lockwashers,

and ground rod clamps on top of the ground cable box.

(4) Place the box containing technical manuals and log-

books on top of the box containing bolts, nuts, lock-

washers, and ground clamps.

(5) Mark the PPP-B-601 box indicating nomenclature and

quantity of contents.

1. Preservation of Fuel Transfer Pump (two).

(1) Atomize spray the inlet and outlet of the pump

with preservative oil (9150-00-111-0209) and allow

to drain.

(2) Seal off the inlet and outlet of the pump with

m. Marking.

(1) Mark boxes and units in accordance with appendix E.

(2) Mark four sides of the containers with 2-inch

minimum size letters to indicate "REUSABLE

CONTAINER - DO NOT DESTROY."

B-2-90