Packing for the Exhaust Pipes for 2000 KW

TM 43-0156

Step

Function

Mech

Insp

(2)

Place exhaust pipes into cradles and secure with

cont

FF-W-92 washer and FF-N-836 nuts.

(3)

Place crate top over exhaust pipes and secure to

base with FF-W-92 washer and FF-B-561 lag bolts (1/2

x 4).

(4)

Mark container in accordance with appendix E and the

following: Mark all four sides of the container

with 2-inch minimum size letters to indicate

"REUSABLE CONTAINER - DO NOT DESTROY."

Packing for the Exhaust Pipes for 2000 KW

(1) Fabricate a MIL-C-104 crate (158 x 70-1/4 x 45) and

cradles in accordance with appendix D-3 and figure

B-2-7. Refer to table B-2-9 for a list of materials.

(2) Place exhaust pipes into cradles and secure with

FF-W-92 flat washer and FF-N-836 nuts.

(3) Place crate top over exhaust pipes and secure to

base with FF-W-92 washer and FF-B-561 lag bolts (1/2

x 4).

(4) Mark container in accordance with appendix E and the

following: Mark all four sides of the container

with 2-inch minimum size letters to indicate

"REUSABLE CONTAINER - DO NOT DESTROY."

Packing for the Silencers, Elbows, Gaskets, and Exhaust

Supports for the 1500 KW.

(1) Fabricate a MIL-C-104 crate (133-1/2 x 82-1/2 x

51-1/2) and cradles in accordance with appendixD-3

of materials.

(2) Secure flat piece of the exhaust support to the base

with FF-W-92 washer and FF-N-836 nuts.

(3) Place silencers into cradle and secure with threaded

rod and FF-N-836 nuts.

(4) Bolt elbows to base and upright panels with FF-B-584

bolt (1/2 x 4).

B-2-37