Table 5-1. Organizational Preventive Maintenance Checks and Services - Continued

TM 32-5895-227-14&P

Table 5-1. Organizational Preventive Maintenance Checks and Services - Continued

Interval

Equipment will be reported

Item

Procedures

Not Ready (Red) If::

to be

NO.

inspected

MODIFICATIONS

Verify application of all current MWO's.

One or more urgent MWO's

Apply urgent MWO's immediately. When

not applied.

possible, schedule normal MWO's to avoid

disrupting operations.

*6a

PRESERVATION

Clean AN/MSQ-71 equipment by removing

all accumulated particles, such as dust,

dirt, grease, and grit.

Inspect all painted surfaces for damage,

such as cracked, chipped, flaked, peeled,

weathered, or worn paint. Refinish as

necessary.

Inspect all surfaces for deterioration due

Surface damage is severe.

to rust, corrosion, or fungus.

POWER CABLES,

Check for loose connections. Tighten as

RECEPTACLES,

necessary.

AND EARTH

GROUND

Inspect insulation, wires, and terminals

Damage renders AN/MSQ-

CONNECTIONS

for damage, such as cuts, abrasions, frays,

71 inoperative or causes

breaks, kinks, and bends. Repair damage

safety hazard.

or replace parts as necessary.

ELECTRICAL

Check for proper operation of circuit

Inoperative item renders

COMPONENTS

breakers, relays, switches, lights,

AN/MSQ-71 inoperative or

and plugs.

causes safety hazard.

a. Preservation procedures may be required more frequently when the AN/MSQ-71 is operated under unusual conditions.

5-3