Quantcast INSPECTION/REPAIR - TM-9-2350-238-20-20333

 

Click here to make tpub.com your Home Page

Page Title: INSPECTION/REPAIR
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
DISASSEMBLY - TM-9-2350-238-20-20332
Up
TM-9-2350-238-20-2 Crane (CAB) Components Recovery Vehicle Full-Tracked: Light Armored M578 (
Next
Reassembly - TM-9-2350-238-20-20334
TM
9-2350-238-20-2
Remove
machine
screw
(4),
Iockwasher
2
12
Remove  two  shoulder  screws  (31),  two
flat  washers  (32),  and  rubber  gasket  (33)
(5),  and  switch
stop
knob
(6)
from
rotary
switch  (7).
from  lamp  mounting  plate  (34).
Remove
setscrew
(8),
switch
stop
knob
3
13
Remove
two
machine
screws
(35),
lamp
pushbutton  (9),  and  switch  stop  knob
mounting plate (34), and lamp holder
helical compression spring (10) from
(22) from body (14).
switch stop knob (6).
14
Remove nonmetallic seal (36) from body
Remove
switch
knob
mounting
nut
(11),
4
(14).
rubber switch knob gasket (12), flat
washer (13), and rotary switch (7) from
15
Tag
and
disconnect
electrical
lead
(37)
lens retainer (3).
from rotary switch (7).
5
Remove
lens
retainer
(3)
from
body
(14).
16
Remove two machine screws (38), re-
ceptacle
connector
(39),
and
preformed
6
Remove seven machine screws (15), lens
packing (40) from body (14).
retainer  retaining  plate  (16),  dome  light
white  light  lens  (17),  white  lens  rubber
17
Remove four machine screws (41), four
nonmetallic seal (18), light lens (19), and
Iockwashers
(42),
and
dome
light
parti-
lens rubber gasket (20) from lens retainer
tion (43) from lens retainer (3).
(3).
INSPECTION/REPAIR
7
Tag
and
disconnect
all
leads
from
lamp-
holder (21) and lamp holder (22).
1 Inspect
for
broken,
damaged,
or
missing
parts.
8
Remove  incandescent
lamp
(23)
from
lamp holder (21).
2 If
lamp
mounting
plate
is
broken,
damag-
ed, or missing, repair is by replacement
9
Remove  two
shoulder  screws  (24),  lamp
of next higher assembly.
holder  (21),
two  nonmetallic  grommets
(25), and two Iockwashers (26) from
3 If body is broken or damaged, repair is
lamp  mounting  plate  (27).
by replacement of next higher assembly.
10
Remove  two  machine  screws  (28),  two
4 Repair
is
by
replacement
of
authorized
Iockwashers  (29),  and  lamp  mounting
parts  (TM  9-2350-238-24P-2)
which
do
plate (27) from body (14).
not  meet  inspection  criteria.
11
Remove  incandescent
lamp
(30)
from
lamp holder (22).

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.