Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
Not Fully Mission
I t e m To Check/
H y d r a u l i c reservoir contains 140 gal. (530 l)
c. Open drain valve (2) at top of quick-disconnect
fitting and drain oil into a suitable container.
d. After draining, close drain valve (2), remove
drain hose, and close hull cleanout cover.
e . Open reservoir fill cap (3) and fill reservoir with
O E / H D O 10 (item 14.1, appx C) or OEA (item
14.2, appx C) until it indicates halfway on level
gage (4) in cab.
Perform the following services at the same time
the reservoir is drained:
Change filter element; refer to TM 9-2350-
· Clean hydraulic reservoir breather; refer to
I t e m 13.
· Clean filter and strainer assembly; refer to
I t e m 7.