Quantcast Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION INSTRUCTIONS FOR M578 RECOVERY VEHICLE (Cont) - TM-9-2350-238-20-20049

 

Click here to make tpub.com your Home Page

Page Title: Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION INSTRUCTIONS FOR M578 RECOVERY VEHICLE (Cont)
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION INSTRUCTIONS FOR M578 RECOVERY VEHICLE (Cont) - TM-9-2350-238-20-20048
Up
TM-9-2350-238-20-2 Crane (CAB) Components Recovery Vehicle Full-Tracked: Light Armored M578 (
Next
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION INSTRUCTIONS FOR M578 RECOVERY VEHICLE (Cont) - TM-9-2350-238-20-20050
TM
9-2350-238-20-2
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
INSTRUCTIONS
FOR
M578
RECOVERY
VEHICLE
(CONT)
Item To Check/
Not Fully Mission
Procedure
Item
Interval
No.
Service
Capable If:
25
(cont)
Drain oil from tow winch.
Rotate drum until drain and check plugs (1) and
a.
(2) are down.
Remove drain and check plugs (1) and (2) from
b.
both ends of drum and drain oil into a suitable
container.
D r y cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
Clean drain and check plug (1) with dry cleaning
c.
solvent (item 10, appx C) and install in brake
end.
Rotate drum until drain and check plug (1) is
d.
horizontal (3 or 9 o'clock) position.
Remove fill plug (3) from support bracket.
e.
Add OE/HDO or OEA (item 14.1 or 14.2, appx
f.
C) at fill plug (3) opening until oil comes out
drain and check plug (2) opening at motor end.
Clean drain and check plug (2) and fill plug (3)
g.
with dry cleaning solvent (item 10, appx C) and
install.
2-10.21
Change 1

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.