TM
9-2350-238-20-2
Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)
Not Fully Mission
Procedure
Interval
Item To Check/
Item
Capable If:
No.
Service
Boom Winch
23
A
Drain and Fill
Drain oil from winch.
a.
Remove fill plug (1), drain plug (2), and level
plug (3).
b.
Drain oil into a suitable container.
D r y cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
Clean drain plug (2) with dry cleaning solvent
c.
Fill with OE/HDO or OEA (item 14.1 or 14.2,
d.
appx C) at
fill plug (1) until oil runs out of
level
plug (3) hole.
e.
Clean fill plug (1) and level plug (3) with dry
cleaning solvent (item 10, appx C) and install.
24
Traversing
A
Gearcase
Drain and Fill
and Swivel
Joint Lube
2-10.18
Change 1
Click
here for thousands of PDF manuals
