Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION
INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)
Not Fully Mission
Item To Check/
T OW W i n c h
Fill and Level
Check oil level.
Rotate drum until check plug (1) is in horizontal
(3 or 9 o'clock) position.
b. Remove check plug (1) at motor end of winch.
Remove fill plug (2) at brake end.
d. Add OE/HDO or OEA (item 14.1 or 14.2, appx
C) through fill hole (2) until oil runs out of check
plug hole (1).
D r y cleaning solvent (SD2) is toxic and
flammable. Wear protective goggles and
gloves and use only in well-ventilated area.
e. Clean fill plug (2) and check plug (1) with dry
cleaning solvent (item 10, appx C) and install.