Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION INSTRUCTIONS FOR M578 RECOVERY VEHICLE (Cont)

9-2350-238-20-2

Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION

INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)

Item

Interval

Item To Check/

Not Fully Mission

Procedure

No.

Service

Capable If:

Traversing

Ring Gear

CIean with CLP (item 5, appx C) and coat with

grease (item 12, appx C).

Turret Bearing

Make sure no personnel are in turret well

before traversing cab.

Lubricate quarterly, after 75 hours of operation, or

after each cleaning operation, when turret well is

exposed to steam or high-pressure water.

Apply grease (item 12, appx C) to both lubrica-

tion fittings (1) until clean grease is observed at

seals (2).

b. Wipe away dirty grease that is forced through

seals.

Repeat until only clean grease is observed at

seals.

d. Traverse cab four complete revolutions, alter-

nating left and right.

2-10.11

Change 1