 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-200. MAINTENANCE OF CRANE OPERATOR'S BASE ASSEMBLY (CONT).
REASSEMBLY
5 Install two nonmetallic grommets (5) in
base (4).
abrasive paper.
6 Cut nonmetallic channel (6) as necessary
around grommets. Apply adhesive to
nonmetallic channel (6) and install on base
Dry cleaning solvent (SD2) is toxic
(4) .
and flammable. Wear protective
goggles and gloves and use only in a
7 Install 4 hull brackets (7), 12 flat washers
well-ventilated area.
(8), 12 machine screws (9), and 12 new
self-locking nuts (10).
surfaces to remove any grease. Dry
8 Install two base links (11), four flat
surface thoroughly.
washers (12), four machine screws (13),
and four new self-locking nuts (14) on
3 Apply adhesive to two seals (1) and two
base. Bend if necessary.
tape strips (2). Install seals on tape strips.
9 Install two flat washers (15), two hexagon
4 Apply adhesive to tape strip (3) and install
plain nuts (16), two machine screws (17),
on base (4).
two flat washers (18), and two hexagon
plain nuts (19) on base (4).
2-1144
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals