INSTALLATION - TM-9-2350-238-20-11117

TM 9-2350-238-20-1

DISASSEMBLY

For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

INSPECTION/REPAIR

1 Inspect for broken, damaged, or missing parts.

2 If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

3 For repair of cable terminal, refer to general maintenance, page 2-371.

4 Electrical wire is a manufactured item, refer to appendix D.

5 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

For reassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

INSTALLATION

Install slave receptacle connector (1) with

four new lockwashers (2) and four

machine bolts (3).

Install relay and disconnect to slave

receptacle special cable assembly (4) to

slave receptacle connector (1). Solder

lead to connector per TB SIG-222.

Install heating element to slave electrical

lead (5) to slave receptacle connector (1).

Solder lead to connector per TB SIG-222.

2-1091