Removal of Heater Control Box Driver's Heater Wiring Harness

TM 9-2350-238-20-1

Failure to remove or disconnect batteries before removing or installing any electrical

lead or wiring harness may result in injury or damage to equipment.

NOTE

Tag all electrical leads during removal to aid in installation.

1 Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,

clips, ground screws, etc. Remove only the hardware which secures the harness or lead being

removed.

2 Tag and disconnect heater control box to driver's heater wiring harness (1) plug connector from

vehicular heater (2).

3 Tag and disconnect cable terminal (3) from dome light assembly (4).

4 Tag and disconnect shell connector (5) from line connection.

5 Tag and disconnect plug connector (6) from driver's heater electrical control box (7).

2-1045