Inspection/Repair - TM-9-2350-238-20-11049

TM 9-2350-238-20-1

Loosen two hose clamps (1) and remove air duct hose (2) from driver's heater (3).

Remove two hose clamps (1), two marker bands (4), and hot air duct spring tension clip (5)

from air duct hose (2).

Loosen two hose clamps (6), and remove air duct hose (7) from driver's heater (3).

Remove hot air center duct (8) and two hose clamps (6) from air duct hose (7).

Loosen hose clamp (9) and remove air duct hose (10) from driver's heater (3).

Remove hexagon plain nut (11), Iockwasher (12), machine screw (13), loop clamp (14), and

hose clamp (9) from air duct hose (10).

Loosen hose clamp (15), and remove air duct hose (16) from driver's heater (3).

Remove hose clamp (15), hexagon head capscrew (17), Iockwasher (18), loop clamp (19), and

loop clamp (20) from air duct hose (16).

1 Inspect for broken, damaged, or missing parts.

2 Air duct hoses are manufactured items, refer to appendix D.

3 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

2-1023