MAINTENANCE OF SUSPENSION SYSTEM HYDRAULIC LINES AND FITTINGS (LEFT SIDE) AND ATTACHING HARDWARE.

TM 9-2350-238-20-1

2-158. MAINTENANCE OF SUSPENSION SYSTEM HYDRAULIC LINES AND FITTINGS

(LEFT SIDE) AND ATTACHING HARDWARE.

This task covers:

a. Removal/Disassembly

Reassembly/lnstallation

b. Inspection/Repair

INITIAL SETUP

Materials/Parts

Lockwasher (12)

Preformed packing

Preformed packing (5)

Tube fitting locknut (10)

References

TM 9-2350-238-20-2

TM 9-2350-238-24P-1

Equipment Conditions

Batteries and battery tray removed

2-640

Drivets seat removed

2-952

Driver's compartment forward and aft cowls removed

2-928

Equipment stowage box removed (TM 9-2350-238-20-2)

General Safety Instructions

To avoid injury to personnel, do not tighten or loosen hydraulic fittings when system

is pressurized.

Lower the boom to stowed position before doing any maintenance on hydraulic

system.

Wipe up any spilled hydraulic fluid to prevent injury to personnel.

2-905