 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-151. MAINTENANCE OF VEHICULAR TRACK SHOE INSTALLATION AND
VEHICULAR TRACK SHOE (CONT).
NOTE
It is not necessary to remove track
q
from vehicle to replace shoe pad.
Remove one track at a time.
q
Select area large enough to allow
q
vehicle to be driven or towed at
least 5 vehicle lengths.
Procedures are written for one
q
track, but apply to both tracks.
1 Remove two self-locking nuts (1).
2 Install impact
wire adapter on track shoe
link pin (2).
Attach slide puller to impact
wire adapter
and remove track shoe link
pin (2) from
track (3).
Keep personnel away from vehicle.
3 Using drift pin, drive out track shoe link pin
Personnel injury could result when
(2).
track falls away from idler wheel.
4 Slowly back vehicle until track is
NOTE
completely lying on ground.
Step 2 applies to the removal of the
track shoe link pin from the top of a
5 Back vehicle off track.
roadwheel.
NOTE
q Procedures are written for one track
shoe, but apply to all track shoes.
Steps 1 and 2 apply to the
q
disassembly of the track shoe when
track is removed from vehicle.
1 Remove two self-locking nuts (1).
2 Using drift pin, drive out track shoe link pin
(2) to remove track shoe (3).
2-874
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals