 |
|||
|
|
|||
|
Page Title:
MAINTENANCE OF TORSION BAR SOCKETS. |
|
||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-144. MAINTENANCE OF TORSION BAR SOCKETS.
c. Installation
b. Inspection/Repair
a. Removal
This task covers:
INITIAL SETUP
References
Materials/Pads
TM 9-2350-238-24P-1
Dry cleaning solvent (item 16, appx C)
Gasket
Equipment Conditions
Gasket (9)
2-848 Roadwheel or idler wheel removed
Grease (item 20, appx C)
2-827 Torsion bar removed
Lockwasher (60)
NOTE
Procedure is written for one torsion
bar socket, but applies to all ten
torsion bar sockets.
Remove four hexagon head capscrews (1)
1
and four Iockwashers (2).
NOTE
Do not remove two hexagon head
capscrews and two Iockwashers
securing anchor retainer to torsion
bar socket.
2
Insert two hexagon head capscrews (1)
into two jackscrew holes (3).
Tighten two hexagon head capscrews (1)
3
evenly to separate anchor retainer (4)
from hull.
4
Remove anchor retainer (4) with attached
torsion bar socket (5).
Remove two hexagon head capscrews (1)
5
from jackscrew holes (3).
2-834
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals