MAINTENANCE OF AUXILIARY DRIVE ASSEMBLY (VEHICULAR DRIVE).

TM 9-2350-236-20-1

3 Attach sling and carefully install auxiliary drive assembly (2), using hoist.

4 Install two flat washers (9), two shoulder screws (10), and four hexagon plain nuts (11).

5 Install rubber grommet (12), two sleeve spacers (13), hexagon head capscrew (14), and new

self-locking nut (15) to connecting link (16).

6 Connect magnetic clutch to bearing unit drive shaft (17) to auxiliary drive assembly (2) by

installing four hexagon head capscrews (18) and new Iockwire (19).

7 Connect power takeoff drive shaft (20) to auxiliary drive assembly (2) with four hexagon head

capscrews (21) and new Iockwire (22).

8 Install angle bracket (23), two hexagon head capscrews (24), and new Iockwire (25).

9 Untag and connect four electrical leads (26).

10 Connect electrical connector (27) to auxiliary drive assembly (2).

11 Fill auxiliary drive gearcase with hydraulic fluid. Refer to the PMCS/lubrication table, page 2-13.

2-131. MAINTENANCE OF AUXILIARY DRIVE ASSEMBLY (VEHICULAR DRIVE).

c. Reassembly

b. Inspection/Repair

This task covers: a. D i s a s s e m b l y

INITIAL SETUP

References

Tools and Special Tools

TM 9-2350-238-24P-1

Automotive maintenance and repair shop

equipment: organizational maintenance

common no. 1 (less power) (item 80,

Drain pan

Materials/Parts

Hydraulic fluid (item 21, appx C)

Preformed packing

2-769