Removal - TM-9-2350-238-20-10758

TM 9-2350-238-20-1

2-119. MAINTENANCE OF LOW COOLANT WARNING LIGHT TO BULKHEAD

DISCONNECT BRANCHED WIRING HARNESS (CONT).

3 Disconnect shell connector (2) from

driver's compartment dome light.

Failure to remove or disconnect

4 Disconnect shell connector (3) from line

batteries before removing or installing

disconnect to circuit breaker.

any electrical wiring harness or lead

may result in injury or damaged

5 Disconnect two shell connectors (4) from

equipment.

line disconnects to aeration detector.

1 Wiring harnesses and leads are secured to

6 Remove low coolant warning light to

the hull and components with loop clamps,

bulkhead disconnect branched wiring

straps, clips, ground screws, etc. Remove

harness (5) from hull through driver's

only the hardware which secures the

compartment.

wiring harness or lead being removed.

2 Disconnect plug connector (1) from low

engine coolant warning indicator light.

For disassembly of wiring harness plug connector, refer to general maintenance, page 2-371.

2-732