Installation - TM-9-2350-238-20-10715

TM 9-2350-238-20-1

1 Install hull disconnect to slip ring lead and circuit breaker (1) in hull.

2 Install circuit breaker (2) and two screws (3) on bulkhead.

3 Untag and connect plug connector (4) to hull disconnect.

4 Untag and connect plug connector (5) to slip ring.

5 Wiring harnesses and leads are secured to the hull and components with loop clamps, straps,

clips, ground screws, etc. During installation, make sure the wiring harness or lead is secure

and all hardware is tight.

2-689