Installation/Adjustment - TM-9-2350-238-20-10590

TM 9-2350-238-20-1

2-71. MAINTENANCE OF NEUTRAL POSITION SWITCH AND RELATED PARTS (CONT).

1 Inspect for broken, damaged, or missing parts.

2 If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

3 For repair of electrical shell connectors, refer to general maintenance, page 2-371.

4 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1 Install mounting nut (1) and key washer (2) on neutral position sensitive switch (3).

2 Insert neutral position sensitive switch (3) through mounting hole in bracket (4).

3 Install Iockwasher (5), adjusting nut (6), and roller guide (7) on neutral position sensitive switch

(3).

4 Install two sleeve spacers (8) and bracket (4) to mounting surface. Secure with two flat

washers (9) and two hexagon capscrews (10).

5 Install loop clamp (11) and assembled washer bolt (12).

2-564