Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION INSTRUCTIONS FOR M578 RECOVERY VEHICLE (Cont)

TM 9-2350-238-20-1

Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION

INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)

Not Fully Mission

Procedure

Item To Check/

Interval

Item

Capable If:

Service

No.

Final Drive

Drain and Fill

Oil will be hot after operation.

NOTE

Drain only after operation.

Class Ill leaks

Remove level plug (1) and drain plug (2) and

drain oil into a suitable container.

Dry cleaning solvent (SD2) is toxic and

flammable. Wear protective goggles and

gloves and use only in well-ventilated area.

Clean drain plug with dry cleaning solvent (item

16, appx C) and install.

Remove fill plug (3) in final drive saddIe (left and

right sides).

Slowly add OE/HDO or OEA (item 28 or 29,

appx C) through fill plug hole (3) until oil flows

from level plug hole (1).

Clean plugs (1) and (3) with dry cleaning solvent

(item 16, appx C) and install.

Repeat steps for other side.

2-31