Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION INSTRUCTIONS FOR M578 RECOVERY VEHICLE (Cont)

TM 9-2350-238-20-1

Table 2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES WITH LUBRICATION

INSTRUCTIONS FOR M578 RECOVERY VEHICLE (CONT)

Procedure

Item

Interval

Item To Check/

Not Fully Mission

No.

Service

Capable If:

Engine Oil

Class II leaks.

Filter and

(cont)

Drain (cont)

(1)

Remove oil filter drain plug (3) and drain

oil into a suitable container.

Loosen shoulder bolt (4) and remove shell

(2)

(5), filter element (6), and nonmetallic

washer (7).

Discard filter element and nonmetallic

(3)

washer.

(4)

Clean drain plug (3) and shell (5) with dry

cleaning solvent (item 16, appx C). Dry

thoroughly and install drain plug in shell.

Place new nonmetallic washer (7) in adapt-

(5)

er (8) and press into place.

(6)

Place new filter element in shell (5) and

install shell on adapter (8) with drain plug

(3) down.

(7)

Refill engine crankcase. Refer to

TM 9-2350-238-10.

Tighten shoulder bolt (4) securely and run

(8)

engine for a few minutes.

Shut off engine and check oil level. Add

(9)

oil as necessary.

2-29