LUBRICANT TABLE - TM-9-2350-238-20-10044

TM 9-2350-238-20-1

TOOLS AND SUPPLIES (CONT).

2-10.

Dry cleaning solvent (item 16, appx C) is toxic and flammable. To avoid injury, wear

protective goggles and gloves and use only in well-ventilated area. Avoid contact with

skin or eyes and do not breathe vapors. Do not use near open fire or excessive heat.

The flash point for Type I dry cleaning solvent is 100 F (38 C), and for Type II is

140 F (60 C). If you feel dizzy while using dry cleaning solvent, get fresh air immediately

and get medical aid. If contact with eye is made, wash your eyes with water and get medical

aid immediately.

(1 1) Cleaning. Use clean rag (item 33, appx C) and dry cleaning solvent (item 16, appx C) to

clean grease or oil from all metal surfaces except those exposed to powder fouling. For powder

fouled surfaces, use CLP (item 8, appx C).

LUBRICANT TABLE

REFILL

EXPECTED

CAPACITY

INTERVALS

TEMPERATURE

(APPROX)

LUBRICANT/COMPONENTS

Above 0 F

On Condition

Refill 28 qt

Engine Crankcase

Oil, Lubricating,

(Above -18 C)

(26.5 l)

(Add 3 qt (2.8 1) for

OE/HDO (item 28,

filters)

appx C)

Dry 38 qt

(35.9 l)

Semiannually

Above 0 F

Refill 4 qt

Auxiliary Drive

Oil, Lubricating,

(Above -18 C)

(3.8 l)

OE/HDO (item 28,

appx C)

Dry 4.5 qt

(4.2 l)

Refill

Above 0 F

Semiannually/

Auxiliary Drive Clutch

Oil, Lubricating,

Annually

(Above -18 C)

0.75 pt

Housing

OE/HDO (item 28,

(0.35 l)

appx C)

Dry 0.875 pt

(0.40 l)

2-18