Table 2-1. SERVICE UPON RECEIPT--M578 RECOVERY VEHICLE (Cont)

TM 9-2350-238-20-1

2-4. SERVICE UPON RECEIPT OF MATERIEL (CONT).

Table 2-1. SERVICE UPON RECEIPT--M578 RECOVERY VEHICLE (CONT)

LOCATION

ITEM

ACTION

REMARKS

Driver's

Fuel System

To prime fuel system:

Compart-

ment

Set MASTER and INST switches to ON.

Hold PUMP AND HEATER IGNITER

and PRIME ENGINE FUEL FILTERS

switches in ON for 1 minute.

Release PUMP AND HEATER IGNITER

and PRIME ENGINE FUEL FILTERS

switches and set MASTER and INST

switches to OFF.

Driver's

Start and run engine until lubricant

Compart-

ment

chambers and engine is operating smoothly.

Immediately check for fuel and oil leaks.

Troubleshoot engine if it does not develop

full power in 5 minutes.

2-5. CHECKING UNPACKED EQUIPMENT.

a. Inspect the equipment for damage incurred during shipment. If the equipment has been

damaged, report the damage on SF 364, Report of Discrepancy.

b. Check the equipment against the packing slip to see if the shipment is complete. Report all

discrepancies in accordance with the instructions of DA PAM 738-750.

c. Check to see whether the equipment has been modified.

2-12