FRONT SPRING HANGER INSTALLATION

TM 9-2330-202-14&P

4-47.

SPRING HANGER REPLACEMENT (continued).

e. FRONT SPRING HANGER INSTALLATION

1. Install front spring hanger (1) on frame (13) with four capscrews (12), washers (11 ), and new self-locking nuts (10).

Torque self-locking nuts to 30 Ib-ft (41 Nm).

2. Install drawbar (9) on front spring hanger (1) with capscrew (8) and new self-locking nut (7). Torque self-locking nut

between 140 and 150 Ib-ft (190-203 Nom).

3. Use floor jack to raise vehicle until spring (5) is aligned with front spring hanger (1).

4. Install shackle pin (4) through spring (5) and front spring hanger (1).

5. Install slotted nut (3) on shackle pin (4) and tighten. Install new cotter pin (2) on shackle pin (4).

6. Install new lubrication fitting (6) in shackle pin (4).

7. Remove support from front corner of vehicle. Remove floor jack from under vehicle.

4-96