REAR SPRING HANGER REMOVAL

TM 9-2330-202-14&P

4-47.

SPRING HANGER REPLACEMENT (continued).

b. REAR SPRING HANGER REMOVAL

1. Place floor jack under vehicle on side where rear spring hanger (14) is being removed. Use floor jack to raise trailer.

Place suitable support under rear corner of vehicle.

2. Lower vehicle until weight of trailer rests on support at the rear corner. Some weight will be on floor jack.

3. Remove cotter pin (15), slotted nut (16), and shackle pin (17) from shackle (18) and rear spring hanger (14). Remove

lubrication fitting (19) from shackle pin (17). Discard cotter pin and lubrication fitting.

4. Lower floor jack until shackle (18) is clear of rear spring hanger (14).

5. Remove four self-locking nuts (20), washers (21), and capscrews (22) and rear spring hanger (14) from frame

4-94