 |
|||
|
|
|||
|
Page Title:
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services (Contd). |
|
||
| ||||||||||
|
|
 TM 9-2320-386-10
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services (Contd).
ITEM TO
NOT FULLY
ITEM
INTERVAL
CHECK/
PROCEDURE
MISSION
NO.
SERVICE
CAPABLE IF:
35
After
Front
LUBRICANT MIL SYMBOL
EXPECTED TEMPERATURES
(Contd) Operation
winch
(NATO CODE)
(Contd)
(Contd)
F
C
SPECIFICATION
SAE 15W40
-4 to +122
-20 to +50
(O-1236)
MIL-PERF-2104
OEA
-50 to -4
-46 to -20
(O-183)
MIL-PERF-46167
b. Check winch oil filter (4) for leaks.
b. Mission requires
use of front winch
3
and any class III oil
leakage is evident.
b.1. Check pressure dial indicator
gauge (4.1) on filter housing (4.2). With
engine running, dial indicator gauge (4.1)
must operate in the green or yellow zones.
Notify unit maintenance if dial indicator
6
is operating in red zone (service filter).
7
5
4.2 4.1
4
8
c. Mission requires
check winch, winch control switch (7), and
use of front winch and
winch control valve lever (8) for proper
winch is inoperative.
operation (para. 2-18).
WARNING
Wear hand protection when han-
dling winch cable. Broken wires
may cause injury to personnel.
d. Inspect all hydraulic lines and
d. Mission requires
hoses for signs of deterioration and
use of front winch and
leakage. Notify unit maintenance if
any class III leakage
lines are deteriorated or leaking.
is evident.
e. Mission requires
Check winch cable for kinks, frays, and
use of front winch and
breaks.
frays, kinks, or
breaks are evident.
f. Wind cable (9) on winch drum
9
g. Lubricate winch cable (9).
LUBRICANT MIL SYMBOL EXPECTED TEMPERATURES LUBRICANT MIL SYMBOL EXPECTED TEMPERATURES
(NATO CODE)
(NATO CODE)
F
C
F
C
SPECIFICATION
SPECIFICATION
SAE 15W40
OEA
-4 to +122
+20 to +50
-50 to -4
-46 to -20
(O-1236)
(O-183)
MIL-PERF-2104
MIL-PERF-46167
Change 1
2-37
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals