EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES cont'd

TM 9-2320-386-10

1-11. EQUIPMENT CHARACTERISTICS, CAPABILITIES,

AND FEATURES (Contd)

All ESP vehicles have improved mobility and can traverse all types of roads

and cross-country terrain in extreme high or low temperatures and humidity. The

trucks are capable of fording hard-bottom water crossings up to 30 inches (76

centimeters) without a deepwater fording kit, and 72 inches (183 centimeters) with

the fording kit. Front lifting shackles and vehicle tiedown brackets provide a means

of lifting and securing the truck during transport.

b. Equipment Features.

(1) Engine is a Caterpillar 3116 Air-to-Air After Cooler (ATAAC) diesel, 170

HP, 420 lb-ft (570 Nm), designed to meet or exceed performance require-

ments of the 2-1/2-ton ESP vehicle.

(2) Automatic transmission is an Allison AT1545P or AT545, 4-speed, which

shifts automatically in all forward ranges and requires no operator action

uncommon to standard automatic transmission.

(3) Transfer case is a Rockwell T-136, 2-speed, which in conjunction with the

transmission, provides up to 8 forward and 2 rearward speed ranges to

front and rear differentials.

(4) Front and rear axles are Rockwell C-240.

(5) Wheels are two-piece Motorwheel 20 x 11.00.

(6) Tires are Michelin 14.5 R20XL tubeless radials with a minimum life of

10,000 miles (16,090 km).

(7) Power assist steering cylinder and drag link are manufactured by Sycon.

(8) Central Tire Inflation System (CTIS), designed by CM Automotive

Systems, allows the truck operator to monitor and regulate tire pressure

from driver's compartment before and during vehicle operation.

(9) Air cleaner element has a capacity of 26.9 hours at 580 cfm (16 m3/min)

and is manufactured by Nelson.

1-6

Change 2