RUBBER DRAW LATCHES (HOOD) REPLACEMENT

TM 9-2320-360-20-2

16-8.1. RUBBER DRAW LATCHES (HOOD) REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions Tools and Special Tools

Engine shut off (TM 9-232 0-360-10).

Tool Kit, Genl Mech (Item 54, Appendix F)

Parking brake on (TM 9-2320-360-10).

Wheels chocked.

Materials/Parts

Engine hood opened (TM 9-2320-360-10).

Locknuts (4) (Item 74, Appendix G)

a. Removal

NOTE

Both latches are replaced the same

way. Right side is shown.

(1) Remove two locknuts (1), screws (2),

washers (3), and latch (4) from cab (5).

Discard locknuts.

(2) Remove two locknuts (6), screws (7),

washers (8), latch hook (9), and spring clip

(9.1) from hood (10). Discard locknuts.

(3) Remove two screws (11) and bumper (12)

from hood (10).

Change 1 16-30.1