 |
|||
|
|
|||
|
Page Title:
No. 1 Axle Shock Absorber Installation |
|
||
| ||||||||||
|
|
 TM 9-2320-360-20-2
b. No. 1 Axle Shock Absorber Installation
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(1) Coat threads of mounting pin (2) with
adhesive-sealant.
(1.1) Install mounting pin (2) in axle housing
(2.1).
(1.2) Install washer (1) on mounting pin (2).
(1.3) Install washer (2.2) on stud (3).
(2) Install shock absorber (4j on mounting pin
(2) and stud (3).
(3) Install washer (5) and new locknut (6) on
mounting pin (2). Torque to 170 lb-ft (230
Nm).
(4) Install washer (7) and new locknut (8) on
stud (3). Torque to 170 Ib-ft (230 Nm).
c. No. 2 and No. 3 Axles Shock Absorber
Removal
(1) Remove locknut (1) and washer (2) from
stud (3). Discard locknut.
(2) Remove locknut (4), bushing (5), and
screw (6) from suspension beam (7).
Discard locknut.
(3) Remove shock absorber (8) from stud (3)
and suspension beam (7).
Change 1 15-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
