 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
(6) Remove wooden block (10) from between
axle stop (11) and axle housing (12).
(7) Drain air system (TM 9-2320-360-10).
WARNING
Air suspension system may still
be pressurized even though air
pressure gage reads 0 psi.
Remove air line plug slowly to
allow air to escape. Failure to
comply will result in air line plug
blowing off causing serious
injury to personnel.
Air suspension will drop when air
line is removed.
Stay clear of
suspension. Failure to comply may
result in serious injury to personnel.
(8) Remove plug (13) from fitting (14).
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and is harmful to skin and
clothing. To avoid injury or death,
keep compound away from open fire
and use in well-ventilated area. If
pipe thread sealing compound gets
on
skin
or
clothing,
wash
immediately with soap and water.
(9) Coat threads of elbow (15) with pipe
thread sealing compound.
(10) Install elbow (15) on fitting (14).
(11) Install hose (16) on elbow (15).
(12) Install hose (16) on fitting (9).
c. Follow-On Ma intenance
(1) Start engine (TM 9-2320-360-10).
(2) Build air pressure to 120-125
psi
(827-862 kPa) (TM 9-2320-360-10).
(3) Shut off engine (TM 9-2320-360-10).
(4) Check air springs for leaks.
(5) Remove wheel chocks.
15-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
