 |
|||
|
|
|||
|
Page Title:
Steering Reservoir Installation |
|
||
| ||||||||||
|
|
 TM 9-2320-360-20-2
13-11. STEERING RESERVOIR AND FILTER REPLACEMENT (CONT)
b. Steering Reservoir Installation
(1) Install new preformed packing (1) on plug
(2).
(2) Install plug (2) in reservoir (3).
(3) Install new preformed packing (4) and new
preformed packing (5) on elbow (6).
(4) Install elbow (6) in reservoir (3).
(5) Install new preformed packing (7) and new
preformed packing (8) on elbow (9).
(6) Install elbow (9) in reservoir (3).
(7) Install two new preformed packings (10)
and new preformed packings (11) on two
elbow (12).
(8) Install two elbows (12) in reservoir (3).
(9) Install cable (13), clip (14), and two clamp
brackets (15) on mounting bracket (16)
with eight screws (17) and new locknuts
(18).
NOTE
Ensure 0.5 in. (13 mm) of clearance
is maintained between top of upper
rear bracket and bottom of cover
band clamp.
(10) Position reservoir (3) on two clamp
brackets (15) with aid of assistant.
(11) Install two clamps (19) on reservoir (3)
with four screws (20), new lockwashers
(21), and nuts (22). Tighten nuts to 30 lb-
ft (41 Nm).
13-62 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
