REAR STEERING SHAFTS NO. 1, NO. 2, NO. 3, NO. 4, AND NO. 5 REPAIR

TM 9-2320-360-20-2

13-7. REAR STEERING SHAFTS NO. 1, NO. 2, NO. 3, NO. 4, AND NO. 5 REPAIR

This task covers:

Removal

Installation

Disassembly

Follow-On Maintenance

Assembly

INITIAL SETUP

Equipment Conditions

Materials/Parts

Engine shut off (TM 9-2320-360-10).

Ties, Cable, Plastic (Item 34, Appendix C)

Parking brake on (TM 9-2320-360-10).

Locknuts (6) (Item 61, Appendix G)

Wheels chocked.

Locknuts (5) (Item 56, Appendix G)

No. 1 air reservoir removed (shaft no. 2 only)

Personnel Required

Two

Tools and Special Tools

Tool Kit, Genl Mech (Item 54, Appendix F)

Goggles, Industrial (item 14, Appendix F)

Wrench, Torque, 0-175 Lb-Ft (Item 73,

CAUTION

Do not move HET Tractor wheels during replacement. If wheels are moved, notify

direct support to do steering timing procedure (TM 9-2320-360-34). Failure to

comply may result in improper steering and damage to equipment.

NOTE

Rear steering assembly consists of five shafts between tee gear box and rear

steering gear.

13-24 Change 1