 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
NOTE
Locknuts should be tightened evenly
0.25 in. (6.4 mm) at a time until wheel
parts are drawn together.
(16) Install wheel valve (14) and 12 nuts (15)
on studs (12). Torque to 75-100 Ib-ft
(102-136 Nm) in sequence shown in
NOTE
Torque sequence is performed three
times.
(17) Tighten 12 nuts (15) to 450-500 lb-ft (610-
678 Nm) in sequence shown in figure
Figure 12-1. Torque Sequence
(18) Tighten 12 nuts (15) to 450-500 Ib-ft (610-
678 Nm) in sequence shown in figure
(19) Tighten 12 nuts (15) to 450-500 Ib-ft (610-
678 Nm) in sequence shown in figure
(19.1) Coat threads of 12 studs (12) with
corrosion preventive compound.
Figure 12-2. Torque Sequence
Change 3 12-25
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
