 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
12-5. WHEEL AND TIRE REPAIR (CONT)
c. Tire Removal
WARNING
Wheel/tire assembly must be
deflated in a safety cage or
personal injury or death may
result.
Wheel/tire assembly weighs 523
lbs.
(327 kg).
Attach suitable
lifting device prior to moving to
prevent
possible
injury
to
personnel.
(1) Position wheel/tire assembly (1) in a
safety cage using a lifting device.
(2) Remove cap (2) from valve stem (3).
WARNING
High pressure air will be released
from valve stem when core is
removed. Stay clear of valve stem
after core is removed. Failure to
comply may result in personnel
injury.
Stand clear of trajectory area
during deflation or personal injury
or death may result.
Always completely deflate tire by
removing valve core from valve
stem
before
attempting
demounting operation. After air
has finished exhausting from
valve stem, carefully run a piece of
wire through valve stem to ensure
it is not plugged and tire is
completely deflated.
Failure to
comply may result in injury to
personnel.
(3) Remove valve core (4) from valve stem
(3) and allow air to drain.
(3.1) Remove wheel/tire assembly (1) from
safety cage and position on chock block
on flat surface with CTI wheel valve
assembly (5) facing up.
12-20 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
