 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320360-20-2
c. Adjustment
(1) Remove cotter pin (1) from clevis pin (2).
Discard cotter pin.
(2) Loosen jamnut (3) on yoke (4).
(3) Remove clevis pin (2) from yoke (4).
(4) Position transmission range selector (5) in
reverse (R) position.
(5) Rotate transmission shift lever (6) on
transmission (7) fully counterclockwise to
reverse (R) position.
NOTE
Do step (6) or (7) as required to
install yoke.
(6) Turn yoke (4) clockwise to shorten cable
(8).
(7) Turn yoke (4) counterclockwise to
lengthen cable (8).
(8) Install clevis pin (2) in yoke (4) and
transmission shift lever (6).
CAUTION
Proper adjustment must be obtained.
Failure to do so may result in clutch
slippage and transmission failure.
NOTE
Proper adjustment is obtained when
transmission range selector locks in
both reverse and first gear.
(9) Shift transmission range selector (5)
through all ranges.
(10) Repeat steps (3), (6), and (8) if
transmission range selector does not lock
into first gear.
(11) Repeat steps (3), (7), and (8) if
transmission range selector does not lock
into reverse.
(12) Install new cotter pin (1) in clevis pin (2).
(13) Tighten jamnut (3) on yoke (4).
d. Follow-On Maintenance
(1) Remove wheel chocks.
(2) Start engine (TM 9-2320-360-10).
(3) Check transmission for correct shifting
(TM 9-2320-360-10).
(4) Shut off engine (TM 9-2320-360-10).
(5) Install shifter guard (para 16-2).
(6) Install lower engine access panel (para
8-13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
