2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
7-93. WINCH WIRE HARNESS REPLACEMENT
This task covers:
c. Follow-On Maintenance
Batteries disconnected (para 7-61).
Tags, Identification (Item 32, Appendix C)
Winch control console panels
Ties, Cable, Plastic (Item 34, Appendix C)
removed (para 17-8).
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
Tag and mark wires before removal.
(1) Remove two screws (1) and wires (2) from
(2) Remove two screws (4) and three wires
(5) from switch (6).
(3) Remove two screws (7), wire (5), and wire
(8) from switch (9).
Location of plastic cable ties should
be marked before removal.
(4) Remove two plastic cable ties (10) from
winch wire harness (11) as required.
|Integrated Publishing, Inc.|