2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
7-76. VERNIER CONTROL REPLACEMENT (CONT)
Vernier controls for DDEC II and
DDEC Ill are not interchangeable.
Installation of wrong part will cause
either too high, or too low, high idle
speed which may result in serious
(1) Install vernier control (1) on connector (2).
Plastic cable tie should be positioned
in locations marked during removal.
(2) Secure vernier control (1) to wire harness
(3) with plastic cable tie (4).
(3) Install three covers (5) on electronic
control box (6) with 19 screws (7).
c. Follow-On Maintenance
Connect batteries (para 7-61).
7-236 Change 3
|Integrated Publishing, Inc.|